Rufus 2.10.973 Portable [Latest] - Create Bootable USB Drives Easily
Rufus is a free and portable software that allows you to create bootable USB drives from ISO images. It is especially useful for creating Windows, Linux, or DOS installation media, or for flashing BIOS or other firmware from DOS.
Rufus is very easy to use. You just need to select your USB drive, the ISO image you want to use, and the partition scheme and target system type. Rufus will automatically detect the best settings for your drive and image, and will format and copy the files in a few minutes.
Rufus also supports advanced options, such as creating persistent partitions, adding extra ISOs, or using DD mode. You can also check the device for bad blocks, or create an extended label and icon files.
Rufus is a lightweight and portable software that does not require installation. You can download it from the official website or from the link below:
Rufus 2.10.973 Portable [Latest]
Rufus is compatible with Windows XP or later, and supports both 32-bit and 64-bit systems. It also supports UEFI and GPT partitions.
If you need a simple and reliable tool to create bootable USB drives, Rufus is a great choice.
In this article, we will show you how to use Rufus to create a bootable USB drive from an ISO image. We will use Windows 10 as an example, but you can use any ISO image you want.
Step 1: Download Rufus and the ISO image
First, you need to download Rufus from the link above or from the official website. Rufus is a portable software, so you don't need to install it. Just save it to a folder of your choice and run it.
Next, you need to download the ISO image you want to use. In this case, we will use Windows 10, which you can download from Microsoft's website. Make sure you choose the correct edition and language for your system.
Step 2: Select your USB drive and the ISO image
Once you have Rufus and the ISO image ready, plug in your USB drive and launch Rufus. Rufus will automatically detect your USB drive and show its details. You can also select a different drive from the drop-down menu if you have more than one connected.
Then, click on the \"SELECT\" button and browse to the folder where you saved the ISO image. Select the ISO image and click \"Open\". Rufus will show the image details and suggest the best settings for your drive and image.
Step 3: Adjust the settings if needed
Rufus will usually choose the optimal settings for your drive and image, but you can also change them if you want. For example, you can change the volume label, the file system, the cluster size, or the partition scheme and target system type.
You can also click on the \"Advanced Options\" button to access more features, such as creating persistent partitions, adding extra ISOs, or using DD mode. However, these options are not recommended for beginners or for most cases.
Step 4: Start the process
When you are ready, click on the \"START\" button to begin the process. Rufus will warn you that all data on your USB drive will be erased. Make sure you have backed up any important files before proceeding. Click \"OK\" to confirm.
Rufus will then format your USB drive and copy the files from the ISO image. This may take some time depending on the size of your drive and image. You can monitor the progress and status on the Rufus window.
When Rufus is done, it will show a message saying \"READY\". You can now close Rufus and safely eject your USB drive.
Step 5: Use your bootable USB drive
You have successfully created a bootable USB drive with Rufus. You can now use it to install Windows 10 or any other operating system on your computer. To do so, you need to boot from your USB drive instead of your hard disk.
The exact steps to boot from a USB drive may vary depending on your computer model and BIOS settings. You may need to press a certain key during startup (such as F12 or Esc) to access a boot menu, or enter the BIOS setup (usually by pressing F2 or Del) and change the boot order.
Once you boot from your USB drive, you should see a screen similar to this:
Follow the instructions on the screen to install Windows 10 or any other operating system on your computer.
Rufus is a free and portable software that allows you to create bootable USB drives from ISO images. It is very easy to use and supports various options and features. You can use Rufus to create Windows, Linux, or DOS installation media, or for flashing BIOS or other firmware from DOS.
We hope this article was helpful and informative. If you have any questions or feedback, please leave a comment below. 0efd9a6b88